FOAM MAT OR NATURAL WOOD COVER

The cold water is branched off in front of the mixer tap and passed through the heat exchanger.

The warm shower water falls from the shower head with 38ºC and falls over the showering matt with the heat exchanger,  and heats (without direct contact) the cold fresh water by 10-15°C.

The cold water, now preheated, is fed back into the shower mixer tap.

Less hot water needs to be added to the already preheated cold water to reach the usual shower temperature.

The water heater has to work less and thus saves energy.

Easier and faster

The WWHRS Shower Mat with heat exchanger improves energy efficiency, reduces CO2 emissions, and contributes to cost savings. Without Changing Your Showering Habits!

The WWHRS Shower Mat incorporates a special device called heat exchanger. This innovative feature allows the shower tray to capture the heat from the outgoing showering water (waste water) as it drains from the shower.

The captured heat is then transferred to the incoming cold water supply, effectively preheating the water before it reaches the shower mixer. This preheated water supply offers several advantages.

First, it reduces the demand for hot water from your boiler or water heater.

Since the cold water is already partially heated, less energy is required to bring it to the desired temperature, resulting in energy savings.

Design

Designed to offer advanced solutions in weight, durability, and installation versatility.

Material:

Based on an innovative next-generation material created through highly industrialized and cutting-edge processes.

This material combines strength and durability, thanks to modern engineering, with environmentally friendly principles. It is easy to cut and install, a durable, and 100% recyclable solution.

Connectors:

Centrally placed to offer a balanced and aesthetic appearance, facilitating installation by aligning with the mixer and reducing installation costs.

Situated at the same level as the shower mat margin, reducing the overall height of the assembly and allowing for more units to be transported on a pallet, thereby reducing transportation costs per unit.

Press-fit connectors.

Optionally available with screw connectors for customers who prefer this option.
Flexible hoses allows external conection to the mixer or inside the wall directly to the pipes.

Measures

• 23.62 x 19.69 inches format available for shower tray or linear drain tiled solutions

• 11.81 x 27.56 inches format available for bathtubs and walkin bathtubs:

Standards and Certifications

The product is fully fabricated in Europe in factories certified with ISO 9001, ISO 14001, OHSAS 18001, DV-GL, and CE, ensuring the highest standards of quality.

The system and shower tray performances were tested and certified in external institutes.

1. Cleanability. Surface Appearance (valuation): UNE-EN 14527:2016+A1:2019 – Correct
2. Water Drainage (valuation): UNE-EN 14527:2016+A1:2019 – Correct
3. Base Stability: UNE-EN 14527:2016+A1:2019 – Correct
4. Resistance to Chemicals and Staining Agents (valuation): EN 14527:2016+A1:2019 – No deterioration, Correct
5. Resistance to Temperature Variations (valuation): EN 14527:2016+A1:2019 – No deterioration, Correct
6. Slip Resistance Class: UNE-EN 16165:2022 AN.2 – C3
7. The heat exchanger was tested according the procedure stated in: Annex B of the NEN 7120+C2:2012/C5:2014.

Compliance with EN 1717 Standards

Our Waste Water Heat Recovery System (WWHSR) is designed and in full compliance with the EN 1717 standards, ensuring the highest levels of safety and efficiency.

Designed for Category 2 and 3 Fluids:

Our WWHSR is specifically designed to handle Category 2 and 3 fluids. These fluids are classified as posing a slight to moderate health risk but do not involve hazardous substances.

Safe and Secure Installation:

The system is installed in a clean area within the shower, prior to the siphon, ensuring it is not exposed to any potentially hazardous environments such as gases or liquids from sewage systems. This installation method guarantees that the WWHSR only interacts with clean shower water, maintaining a safe environment for heat recovery.

Robust Single-Wall Construction:

In accordance with EN 1717 standards (Article 5.3.2 and Article 5.4.1.1), our WWHSR uses a single-wall heat exchanger as the system is not exposed to environments that could pose a higher risk of contamination. Additionally, a membrane valve is also available to prevent backflow siphonage, ensuring the protection of the potable water supply.

Ease of Access for Maintenance:

The system includes a lightweight wooden cover or soft lid that can be easily lifted, providing straightforward access to the heat exchanger. This feature allows for quick and efficient inspection and cleaning, further ensuring the system’s safe operation and longevity.

By adhering to these stringent standards and design principles, our WWHSR not only enhances energy efficiency but also ensures the highest levels of safety and compliance with applicable norms from Europe, UK, USA, Canada, and several other countries. Please consult with a local advisor for specific information

Heat Recovery:

The shower mat incorporates a heat exchanger that captures the heat from the outgoing grey water (waste water) as it drains from the shower. This captured heat is then transferred to the incoming cold water supply.

Preheated Water Supply:

By preheating the cold water with the recovered heat, the WWHRS Shower Mat reduces the demand for hot water from your boiler or water heater. This means that less energy is needed to heat the water to the desired temperature, resulting in energy savings.

Reduced Boiler Usage:

With the preheated water supply, your boiler or water heater doesn’t have to work as hard to reach the desired temperature, thereby reducing its energy consumption. This leads to lower energy bills and a reduced carbon footprint. By preheating the incoming cold water supply with the recovered heat, the WWHRS Shower Mat reduces the amount of work your boiler or water heater needs to do to reach the desired temperature. This means that your boiler operates less frequently, leading to reduced wear and tear on its components.

Lower Strain on the Boiler:

With the preheated water supply, your boiler operates more efficiently and experiences less strain during the heating process. This can result in a longer lifespan for your boiler, as it is subjected to less frequent and intense heating cycles.

Decreased Maintenance and Repair Costs:

As your boiler operates less frequently and under reduced strain, it is less likely to encounter issues or require frequent maintenance and repairs. This can save you money on maintenance and repair costs over the long term

It offers an all-in-one sustainable solution that combines the functionality of a traditional shower tray with the added benefit of heat recovery technology.

Without Changing Your Showering Habits!

CONTRACT, OEM OR DISTRIBUTION